The IQAir HealthPro has a modular housing design that enables you to replace filters within minutes. When performing a filter change, always disconnect the power supply before attempting to open the device.
Press the first locking arm outward using both thumbs. Press just hard enough to release the arm from it's snap-in position. Disengage the other arm in the same manner. Pull both locking arms simultaneously towards the outside until they lock into place. Remove the diffuser(or top assembly) to gain access to the HyperHEPA filter or V-5 Cell.
To remove the premax filter, slightly lift and slide the filter frame like a drawer. When replacing filters, make sure all of the arrows on the new filters are pointing up.
To close the machine, make sure all of the filter frames are in place and simultaneously close your locking arms.
RESET THE FILTER LIFE
Reconnect the power supply to your IQAir air purifier and reset the filter life on your control panel. To reset the filter life, press the menu key until "New Filter" appears. Press and hold the enter key until the cursor starts to flash. Use the arrow key to select the appropriate filter to reset and press the enter key to confirm the selected filter. Press the enter key once more to confirm the resetting of the selected filter.
All prices are in AUD.
Copyright 2017 AirCleaners Australia.